Basic Info.
Usage
Light, Industry, Construction, Digital Products, Vehicle
Driving Method
LED Constant Current
Circuit Structure
Electronic Step-down Transformer
Certification
TUV, CE, RoHS, ISO9001, CCC
Power Supply Mode
Constant Current Source
In-Out
Lifting Pressure Type
Power Supply Voltage
90~305VAC 127~431VDC
Product Description
For this serie,it includes:
12V,15V,20V,24V,30V,36V,42V,48V,54V outputs.For more details,please check the following Spec:
MODEL | | HLP-40H-12 | HLP-40H-15 | HLP-40H-20 | HLP-40H-24 | HLP-40H-30 | HLP-40H-36 | HLP-40H-42 | HLP-40H-48 | HLP-40H-54 | OUTPUT | DC VOLTAGE | 12V | 15V | 20V | 24V | 30V | 36V | 42V | 48V | 54V | CONSTANT CURRENT REGION Note.4 | 7.2 ~12V | 9 ~ 15V | 12 ~ 20V | 14.4 ~ 24V | 18 ~ 30V | 21.6 ~ 36V | 25.2 ~ 42V | 28.8 ~ 48V | 32.4 ~ 54V | RATED CURRENT | 3.33A | 2.67A | 2A | 1.67A | 1.34A | 1.12A | 0.96A | 0.84A | 0.75A | RATED POWER | 40W | 40W | 40W | 40.1W | 40.2W | 40.3W | 40.3W | 40.3W | 40.5W | RIPPLE & NOISE (max.) Note.2 | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 200mVp-p | 300mVp-p | 300mVp-p | 300mVp-p | VOLTAGE ADJ. RANGE | 10.8 ~ 13.5V | 13.5 ~ 17V | 17 ~ 22V | 22 ~ 27V | 27 ~ 33V | 33 ~ 40V | 40 ~ 46V | 44 ~ 53V | 49 ~ 58V | CURRENT ADJ. RANGE | Can be adjusted by internal potentiometer | 2 ~ 3.33A | 1.6 ~ 2.67A | 1.2 ~ 2A | 1 ~ 1.67A | 0.8 ~ 1.34A | 0.67 ~ 1.12A | 0.58 ~ 0.96A | 0.5 ~ 0.84A | 0.45 ~ 0.75A | VOLTAGE TOLERANCE Note.3 | ±2.5% | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | LOAD REGULATION | ±2.0% | ±1.5% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | SETUP, RISE TIME Note.6 | 500ms, 80ms at full load 230VAC / 115VAC | HOLD UP TIME (Typ.) | 16ms/230VAC 16ms/115VAC at full load | INPUT | VOLTAGE RANGE Note.5 | 90 ~ 305VAC 127 ~ 431VDC | FREQUENCY RANGE | 47 ~ 63Hz | POWER FACTOR (Typ.) | PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) | TOTAL HARMONIC DISTORTION | THD< 20% when output loading 60% at 115VAC/230VAC input and output loading 75% at 277VAC input >= >= | EFFICIENCY (Typ.) | 87% | 87% | 88% | 88% | 88.5% | 89% | 89% | 89.5% | 89.5% | AC CURRENT (Typ.) | 0.43A / 115VAC 0.24A / 230VAC 0.23A / 277VAC | INRUSH CURRENT(Typ.) | COLD START 50A(twidth=210μs measured at 50% Ipeak) at 230VAC | MAX. No. of PSUs on 16A CIRCUIT BREAKER | 12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 230VAC | LEAKAGE CURRENT | <0.75mA / 277VAC | PROTECTION | OVER CURRENT Note.4 | 95 ~ 108% | Protection type : Constant current limiting, recovers automatically after fault condition is removed | SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed | OVER VOLTAGE | 15 ~ 21V | 18 ~ 24V | 23 ~ 30V | 28 ~ 35V | 35 ~ 43V | 41 ~ 49V | 48 ~ 58V | 54 ~ 65V | 59 ~ 68V | Protection type : Shut down o/p voltage, re-power on to recover | OVER TEMPERATURE | Shut down o/p voltage, re-power on to recover | ENVIRONMENT | WORKING TEMP. | -40 ~ +70ºC (Refer to "Derating Curve") | WORKING HUMIDITY | 20 ~ 95% RH non-condensing | STORAGE TEMP., HUMIDITY | -40 ~ +80ºC, 10 ~ 95% RH | TEMP. COEFFICIENT | ± ºC ºC0.03%/ (0 ~ 50 ) | VIBRATION | 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes | SAFETY & EMC | SAFETY STANDARDS | UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13, ,GB19510.14 GB19510.1 approved ; design refer to UL60950-1,TUV EN60950-1, EN60335-1 | WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH | EMC EMISSION | Compliance to EN55015, GB17743, GB17625.1, EN61000-3-2 Class C (>=60% load) ; EN61000-3-3 | EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV), criteria A | OTHERS | MTBF | 287.9Khrs min. MIL-HDBK-217F (25ºC) | DIMENSION | 147*53*27mm (L*W*H) | PACKING | 0.2Kg;72pcs/15.4Kg/1.09CUFT | NOTE | 1. All parameters NOT specially mentioned are measured at 230VACinput, rated load and 25 ºC ol ambient temperature. 2. Ripple & noise are measured at 20MHz ol bandwidth by using a 12" twisted pair-wire terminated with a 0.1ul & 47ul parallel capacitor.3. Tolerance : includes set uptolerance, line regulation and load regulation. 4. Please reler to "DRIVING METHODS OF LED MODULE". 5. Derating may be needed under low input voltages. Please check the static characteristics lor more details. 6. Length ol set up time is measured at cold lirst start. Turning ON/OFF the power supply may lead to increase ol the set up time. 7. The power supply is considered a component which will be installed into a linal equipment. All the EMC tests are been executed by mounting the unit on a mm* mm metal plate with 1mm ol thickness. The linal equipment must be re-conlirmed that it still meets EMC directives. 360 360 For guidance on how toperlorm these EMCtests, please reler to "EMI testing ol component power supplies."as available on http://shanghaiqs606.en.made-in-china.com)8. Direct connecting to LEDs issuggested, but is not suitable lor using additional drivers.9. To lullill requirements ol the latest ErP regulation lor lightinglixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. |
|
Address:
6f, Shiye Building, No. 716 Pingliang Road, Shanghai, China
Business Type:
Trading Company
Business Range:
Apparel & Accessories, Auto, Motorcycle Parts & Accessories, Consumer Electronics, Electrical & Electronics, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Office Supplies, Security & Protection
Management System Certification:
ISO 9001, GMP, BSCI
Company Introduction:
Our company is one of the biggest distributions of meanwell in Shanghai China, We have been cooperating with meanwell for more ten years. So we are very familiar with meanwell′s products. MEAN WELL is a leading standard switching power supply manufacturers in the world. Our product lines include AC/DC switching power supplies, DC/DC converters, DC/AC inverters and battery chargers, meanwell has over 5, 000 standard models widely used in automation, communication, LED lighting, medical, moving sign, and office automation fields.
For our company, there are the following advantages:
1, We prepare lots of standard products in stocks, so we can send goods to you immediately.
2, we can provide you customized products, for example adding connectors, extending wires and so on(of course, there is MOQ=200 requirement).
3, if you need samples to confirm, we can send samples to you quickly using cheaper and faster international express, we can also provide you freight transport, and we can trade with you by EX-W, FOB, CIF and so on.
4, for after-sale service, we can send you new products to replace the failure ones during the warranty period.
Lastly, welcome to Shanghai city to visit our office, if you like, we can also visit meanwell factory together.