Basic Info.
Usage
Light, Industry, Construction, Digital Products, Vehicle
Driving Method
LED Constant Current
Circuit Structure
PWM Controlled
Certification
TUV, CE, RoHS, ISO9001, CCC
Power Supply Mode
Constant Current Source
In-Out
Lifting Pressure Type
Power Supply Voltage
AC85-265
Specification
180*63*35.3mm
Product Description
For this serie,it includes:
12V,24V,36V,42V,48V outputs.For more details,please check the following Spec:
MODEL | | ELG-75-12 | ELG-75-24 | ELG-75-36 | ELG-75-42 | ELG-75-48 |
OUTPUT | DC VOLTAGE | 12V | 24V | 36V | 42V | 48V |
CONSTANT CURRENT REGION Note.2 | 6 ~ 12V | 12 ~ 24V | 18 ~ 36V | 21 ~ 42V | 24 ~ 48V |
RATED CURRENT | 5A | 3.15A | 2.1A | 1.8A | 1.6A |
RATED POWER Note.5 | 60W | 75.6W | 75.6W | 75.6W | 76.8W |
RIPPLE & NOISE (max.) Note.3 | 150mVp-p | 200mVp-p | 250mVp-p | 250mVp-p | 250mVp-p |
VOLTAGE ADJ. RANGE | Adjustable for A-Type only (via built-in potentiometer) |
10.8 ~ 13.2V | 21.6 ~ 26.4V | 32.4 ~ 39.6V | 37.8 ~ 46.2V | 43.2 ~ 52.8V |
CURRENT ADJ. RANGE | Adjustable for A-Type only (via built-in potentiometer) |
2.5 ~ 5A | 1.57 ~ 3.15A | 1.05 ~ 2.1A | 0.9 ~ 1.8A | 0.8 ~ 1.6A |
VOLTAGE TOLERANCE Note.4 | ±3.0% | ±3.0% | ±2.5% | ±2.5% | ±2.0% |
LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
LOAD REGULATION | ±2.0% | ±1.0% | ±1.0% | ±0.5% | ±0.5% |
SETUP, RISE TIME Note.6 | 500ms, 100ms/115VAC, 230VAC |
HOLD UP TIME (Typ.) | 10ms/ 230VAC 10ms/ 115VAC(at full load) |
INPUT | VOLTAGE RANGE Note.5 | (Please refer to "STATIC CHARACTERISTIC" section) 100 ~ 305VAC 142 ~ 431VDC |
FREQUENCY RANGE | 47 ~ 63Hz |
POWER FACTOR | PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load>= >= >= (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) |
TOTAL HARMONIC DISTORTION | THD< 20%(@load 50%/115VC,230VAC; @load 75%/277VAC)>= >= (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section) |
EFFICIENCY (Typ.) | 85% | 88% | 89% | 90% | 90% |
AC CURRENT | 0.7A / 115VAC 0.45A / 230VAC 0.38A/277VAC |
INRUSH CURRENT(Typ.) | COLD START 50A(twidth=350μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 |
MAX. No. of PSUs on 16A CIRCUIT BREAKER | 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC |
LEAKAGE CURRENT | <0.75mA / 277VAC |
NO LOAD / STANDBY POWER CONSUMPTION | No load power consumption <0.5W for Blank / A / Dx / D2-Type Standby power consumption <0.5W for B / DA-Type |
PROTECTION | OVER CURRENT | 95 ~ 108% |
Constant current limiting, recovers automatically after fault condition is removed |
SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed |
OVER VOLTAGE | 14 ~ 18V | 28 ~ 34V | 41 ~ 48V | 47 ~ 54V | 54 ~ 62V |
Shut down output voltage, re-power on to recover |
OVER TEMPERATURE | Shut down output voltage, re-power on to recover |
ENVIRONMENT | WORKING TEMP. | Tcase=-40 ~ +85ºC (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) |
MAX. CASE TEMP. | Tcase=+85ºC |
WORKING HUMIDITY | 20 ~ 95% RH non-condensing |
STORAGE TEMP., HUMIDITY | -40 ~ +80ºC, 10 ~ 95% RH |
TEMP. COEFFICIENT | ± ºC ºC0.03%/ (0 ~ 60 ) |
VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes |
SAFETY & EMC | SAFETY STANDARDS | UL8750(type"HL"), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; IP65 or IP67; GB19510.1, GB19510.14 approved |
|
|
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH |
EMC EMISSION | Compliance to EN55015,EN61000-3-2 Class C (@load>=50%) ; EN61000-3-3; GB17743, GB17625.1 |
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV) |
OTHERS | MTBF | 1172K hrs min. Telcordia SR-332 (Bellcore) 331Khrs min. MIL-HDBK-217F (25ºC) |
DIMENSION | 180 63* *35.5mm (L*W*H) |
PACKING | 0.7Kg;16pcs/12.2Kg/0.67CUFT |
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input rated and 25 ol ambient temperature.current ºC 2. Please reler to "DRIVING METHODS OF LED MODULE". 3. Ripple & noise are measured at 20MHz ol bandwidth by using a 12" twisted pair-wire terminated with a 0.1ul & 47ul parallel capacitor.4. Tolerance : includes set up tolerance line regulation and load regulation. 5. De rating may be needed under low input voltages. Please .-reler to "STATIC CHARACTERISTIC" sections lor details 6. Length ol set up time is measured at lirst cold start. Turning ON/OFF the driver may lead to increase ol the set up time. 7. The driver is considered as a component that will be operated in combination with linal equipment. Since EMC perlormance will be allected by the complete installation the linal equipment manulacturers must re-qualily EMC Directive on the complete installation again. 8. This series meets the typical lile expectancy ol >50000 hours ol operation when Tcase particularly tc point or TMP per DLC) is about 70ºC or less. 9. Please reler to the warranty statement on MEAN WELL's website at http://shanghaiqs606.en.made-in-china.com |
Address:
6f, Shiye Building, No. 716 Pingliang Road, Shanghai, China
Business Type:
Trading Company
Business Range:
Apparel & Accessories, Auto, Motorcycle Parts & Accessories, Consumer Electronics, Electrical & Electronics, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Office Supplies, Security & Protection
Management System Certification:
ISO 9001, GMP, BSCI
Company Introduction:
Our company is one of the biggest distributions of meanwell in Shanghai China, We have been cooperating with meanwell for more ten years. So we are very familiar with meanwell′s products. MEAN WELL is a leading standard switching power supply manufacturers in the world. Our product lines include AC/DC switching power supplies, DC/DC converters, DC/AC inverters and battery chargers, meanwell has over 5, 000 standard models widely used in automation, communication, LED lighting, medical, moving sign, and office automation fields.
For our company, there are the following advantages:
1, We prepare lots of standard products in stocks, so we can send goods to you immediately.
2, we can provide you customized products, for example adding connectors, extending wires and so on(of course, there is MOQ=200 requirement).
3, if you need samples to confirm, we can send samples to you quickly using cheaper and faster international express, we can also provide you freight transport, and we can trade with you by EX-W, FOB, CIF and so on.
4, for after-sale service, we can send you new products to replace the failure ones during the warranty period.
Lastly, welcome to Shanghai city to visit our office, if you like, we can also visit meanwell factory together.